GRILL MOTORS

We supply engines to the drawer (for larger weighting) or with battery (for smaller weighting). We also produce stainless steel tenons to link these engines with the spit.

GRILL MOTORS

Motor UMR03 - 12V - (702)

Strong grill motor with possible weighting up to 120 kg - to the drawer 230 / 12V or 12V battery - 12V DC power input, 1,6-2A - Speed: 2,5 min-1 - A flat carrier with a groove (inner bore 14 x 6 mm) - Fixation on the grill with three screws (included)
+

Tenon 14x6 for motor UMR03 - (723)

To connect  spit with motor UMR03-12V. On the motor side is tenon 14x6 mm for insertion into the outlet of the engine. On the side of the spit is hole with diameter of 16.5 mm. Total length of the tenon  is 57 mm and diameter 20 mm. Made from stainless steel.
+

Motor battery - 1BAT - (1,5v) - (691)

The engine on the grill with 1 battery 1.5V, intended for small grill, the maximum balance during two chickens, two knees and below. Number of revolutions: 4 rev / min, left and right rotation, batteries not included. Pin 4 edges 6 x 6 mm.
+

Tenon 6x6 for motor battery 1BAT- (733)

To connect  spit with motor battery 1 BAT On the motor side is pin with 4 edges 6 x 6 mm. On the side of the spit is hole with diameter of 16.5 mm. Made from stainless steel.
+

Motor battery - 2BAT (3V) - (406)

The engine on the grill with 2 battery 3V, intended for small grill, the number of revolutions 4 rev / min. Batteries not included. Inner outlet with 4 edges with diameter of 8 x 8 mm.
+

Tenon 8x8 for motor battery 2BAT - (945)

To connect  spit with motor battery 2 BAT On the motor side is pin with 4 edges 8 x 8 mm. On the side of the spit is hole with diameter of 16.5 mm. Made from stainless steel.. 
+